Implement automatic protection systems

Oct 13, 2025 by talynt.org 75 views

Automation System for Protection Motor Induction Three-Phase from Disorders of More Load and High Temperatures based on Zelio Logic

Introduction

The three-phase induction motor is a crucial component in various industrial applications, but it can face significant problems when fitted with a variety of mechanical loads. One of the primary issues that often occurs is an increase in temperature that exceeds the setting point in thermal overload relays (TOR) in an electrical circuit. In this article, we will discuss the importance of automation systems in protecting three-phase induction motors from disorders caused by more load and high temperatures based on Zelio Logic.

The Problem of Thermal Overload Relays

Thermal Overload Relay serves to detect heat accumulation during a certain period. When the motor temperature reaches the specified limit, this relay will decide on electricity to prevent further damage. However, an increase in current that causes overheating conditions in induction motors also requires rapid intervention from the thermometer controller connected in the circuit panel. The testing of trip time shows that when the current increases up to 1.5 times, 2 times, 2.5 times, and 3 times the setting value (ISET), the recorded trip time varies significantly.

Analysis of the Effect of Current and Temperature on the Protection System

It is essential to understand that the right settings in the torch and thermometer controller are very important in preventing motor damage. Nominal current settings (IL) and correct regulatory values can help extend the life of the motor and prevent unwanted downtime. In the automation system, device integration such as Zelio Logic can facilitate monitoring and controlling motor operational conditions in real-time. The trip time analysis obtained shows that the higher the ISET value, the faster the trip time needed to protect the motor. This shows that there is a linear relationship between the increase in current and the speed of response from the protection system.

Benefits of Automation System in Motor Protection

The application of Zelio Logic-based protection automation systems not only increases operational efficiency but also provides benefits in terms of maintenance. With the ability to monitor temperatures and currents in real-time, this system can provide alarm or notification before damage occurs. This is very important in industrial arrangements where downtime can cause significant losses. In addition, the data collected from monitoring can be used for further analysis and preventive maintenance planning. Thus, companies not only protect their valuable assets but also improve the overall performance of the production system.

Implementation of Automatic Protection Systems

Overall, the implementation of automatic protection systems on three-phase induction motors is highly recommended to maintain reliability and operational efficiency. With the right arrangement and continuous monitoring, the risk of damage due to more load and high temperatures can be minimized, thus supporting the productivity and profitability of the company. The automation system based on Zelio Logic can provide a reliable and efficient solution for protecting three-phase induction motors from disorders caused by more load and high temperatures.

Conclusion

In conclusion, the automation system for protection motor induction three-phase from disorders of more load and high temperatures based on Zelio Logic is a crucial component in maintaining the reliability and operational efficiency of industrial applications. The benefits of this system include increased operational efficiency, reduced maintenance costs, and improved overall performance of the production system. With the right arrangement and continuous monitoring, the risk of damage due to more load and high temperatures can be minimized, thus supporting the productivity and profitability of the company.

Recommendations

Based on the analysis and discussion presented in this article, the following recommendations are made:

Implement automatic protection systems: The implementation of automatic protection systems on three-phase induction motors is highly recommended to maintain reliability and operational efficiency.
Use Zelio Logic-based protection automation systems: The application of Zelio Logic-based protection automation systems can provide a reliable and efficient solution for protecting three-phase induction motors from disorders caused by more load and high temperatures.
Monitor temperatures and currents in real-time: With the ability to monitor temperatures and currents in real-time, this system can provide alarm or notification before damage occurs.
Use data collected from monitoring for further analysis and preventive maintenance planning: The data collected from monitoring can be used for further analysis and preventive maintenance planning to improve the overall performance of the production system.

By following these recommendations, companies can minimize the risk of damage due to more load and high temperatures, thus supporting the productivity and profitability of the company.
Frequently Asked Questions (FAQs) about Automation System for Protection Motor Induction Three-Phase from Disorders of More Load and High Temperatures based on Zelio Logic

Q: What is the main problem that occurs in three-phase induction motors when fitted with a variety of mechanical loads?

A: The main problem that often occurs is an increase in temperature that exceeds the setting point in thermal overload relays (TOR) in an electrical circuit.

Q: What is the purpose of Thermal Overload Relay (TOR)?

A: Thermal Overload Relay serves to detect heat accumulation during a certain period. When the motor temperature reaches the specified limit, this relay will decide on electricity to prevent further damage.

Q: What is the effect of excessive load currents on the response time of thermal overload relays?

A: Excessive load currents directly affect the response time of thermal overload relays. The testing of trip time shows that when the current increases up to 1.5 times, 2 times, 2.5 times, and 3 times the setting value (ISET), the recorded trip time varies significantly.

Q: What is the importance of nominal current settings (IL) and correct regulatory values in preventing motor damage?

A: Nominal current settings (IL) and correct regulatory values can help extend the life of the motor and prevent unwanted downtime.

Q: How does the automation system based on Zelio Logic facilitate monitoring and controlling motor operational conditions in real-time?

A: The automation system based on Zelio Logic can facilitate monitoring and controlling motor operational conditions in real-time by integrating devices such as Zelio Logic.

Q: What are the benefits of using Zelio Logic-based protection automation systems?

A: The application of Zelio Logic-based protection automation systems not only increases operational efficiency but also provides benefits in terms of maintenance. With the ability to monitor temperatures and currents in real-time, this system can provide alarm or notification before damage occurs.

Q: How can the data collected from monitoring be used for further analysis and preventive maintenance planning?

A: The data collected from monitoring can be used for further analysis and preventive maintenance planning to improve the overall performance of the production system.

Q: What is the recommended implementation of automatic protection systems on three-phase induction motors?

A: The implementation of automatic protection systems on three-phase induction motors is highly recommended to maintain reliability and operational efficiency.

Q: What are the key recommendations for implementing an automation system for protection motor induction three-phase from disorders of more load and high temperatures based on Zelio Logic?

A: The key recommendations are:

Implement automatic protection systems: The implementation of automatic protection systems on three-phase induction motors is highly recommended to maintain reliability and operational efficiency.
Use Zelio Logic-based protection automation systems: The application of Zelio Logic-based protection automation systems can provide a reliable and efficient solution for protecting three-phase induction motors from disorders caused by more load and high temperatures.
Monitor temperatures and currents in real-time: With the ability to monitor temperatures and currents in real-time, this system can provide alarm or notification before damage occurs.
Use data collected from monitoring for further analysis and preventive maintenance planning: The data collected from monitoring can be used for further analysis and preventive maintenance planning to improve the overall performance of the production system.

By following these recommendations, companies can minimize the risk of damage due to more load and high temperatures, thus supporting the productivity and profitability of the company.