Understanding the Importance of Gas Turbine Combustion Chamber Design

Oct 13, 2025 by talynt.org 82 views

Introduction

The utilization of electrical energy in Indonesia plays a vital role in supporting development in various sectors. Among the electricity generation technology, gas turbines that drive electric generators are one of the efficient and effective solutions. This article will discuss the basic principles and steps in the design and analysis of gas turbine combustion chamber by utilizing Ansys software and thermodynamic calculations.

Purpose and Methodology

The combustion chamber in the gas turbine is designed with the aim of analyzing aspects of thermodynamics, such as the temperature and average pressure that comes out of the combustion chamber. In this case, some of the main components of the combustion chamber will also be evaluated. This design process involves two main approaches: the calculation of thermodynamics and numerical simulations using ANSYS.

The thermodynamic calculation method is used to obtain initial data regarding temperature and pressure, which produces a combustion chamber out of 1323 K and a pressure of 9,969 bar. Meanwhile, the simulation using Ansys aims to verify these results by visualizing and analyzing the distribution of temperature, pressure, and hot air velocity coming out of the combustion chamber.

Understanding the Importance of Gas Turbine Combustion Chamber Design

The design of the combustion chamber in the 128 MW electric generator driving gas turbine is very important to optimize the efficiency of power plants. The combustion chamber is a critical component of the gas turbine, as it is responsible for mixing the fuel and air, igniting the mixture, and producing the high-temperature and high-pressure gases that drive the turbine.

Thermodynamic Calculations and Numerical Simulations

Simulation and Analysis Results

The simulation results carried out with Ansys show that the average temperature out of the combustion chamber reaches 1580 K, the average pressure out of the combustion chamber is 9.90 bar, and the average speed of hot air is 651 m/s. When the simulation results are compared with the results of thermodynamic calculations, there are significant differences. The temperature obtained from Ansys was around 19.42% compared to the results of the thermodynamic calculation, while the average pressure showed smaller results, which was 0.6%.

This difference shows that numerical simulations using Ansys are able to provide a deeper understanding of the dynamics of fluid in the combustion chamber, as well as the effects of various operating conditions. Ansys can capture complex interactions between the variables in the system, which cannot be fully covered by a simple analytical calculation model.

Benefits of Using Ansys in Gas Turbine Combustion Chamber Design

The use of Ansys in gas turbine combustion chamber design offers several benefits, including:

Improved accuracy: Ansys can provide more accurate results compared to thermodynamic calculations, which can lead to improved efficiency and performance of the power plant.
Deeper understanding: Ansys can provide a deeper understanding of the dynamics of fluid in the combustion chamber, which can lead to improved design and optimization of the combustion chamber.
Increased efficiency: Ansys can help to identify areas of inefficiency in the combustion chamber, which can lead to improved efficiency and reduced emissions.

Conclusion

The design of the combustion chamber in the 128 MW electric generator driving gas turbine is very important to optimize the efficiency of power plants. By using a combination of thermodynamic calculations and numerical simulations using Ansys, a more accurate analysis of the temperature and pressure of the combustion chamber can be obtained. The results of this study not only contribute to efficient combustion chamber design, but also in an effort to increase the capacity and efficiency of the power generation system in Indonesia.

Future Work

Future work can include:

Experimental validation: Experimental validation of the results obtained from Ansys can provide further confirmation of the accuracy of the simulations.
Optimization: Optimization of the combustion chamber design using Ansys can lead to improved efficiency and performance of the power plant.
Scalability: Scaling up the design of the combustion chamber using Ansys can lead to improved efficiency and reduced emissions.

Conclusion

Frequently Asked Questions

In this article, we will answer some of the frequently asked questions related to the analysis of the electric generator gas gas turbine commemoration room design with 128 MW installed power using Ansys.

Q: What is the purpose of the combustion chamber in the gas turbine?

A: The combustion chamber in the gas turbine is designed to analyze aspects of thermodynamics, such as the temperature and average pressure that comes out of the combustion chamber.

Q: What are the main components of the combustion chamber that will be evaluated in this study?

A: Some of the main components of the combustion chamber that will be evaluated in this study include the temperature and average pressure that comes out of the combustion chamber.

Q: What is the difference between thermodynamic calculations and numerical simulations using Ansys?

A: Thermodynamic calculations are used to obtain initial data regarding temperature and pressure, while numerical simulations using Ansys aim to verify these results by visualizing and analyzing the distribution of temperature, pressure, and hot air velocity coming out of the combustion chamber.

Q: What are the benefits of using Ansys in gas turbine combustion chamber design?

A: The use of Ansys in gas turbine combustion chamber design offers several benefits, including improved accuracy, deeper understanding, and increased efficiency.

Q: How can Ansys be used to optimize the combustion chamber design?

A: Ansys can be used to optimize the combustion chamber design by identifying areas of inefficiency and providing a deeper understanding of the dynamics of fluid in the combustion chamber.

Q: What are the limitations of using Ansys in gas turbine combustion chamber design?

A: One of the limitations of using Ansys in gas turbine combustion chamber design is the need for experimental validation of the results obtained from the simulations.

Q: How can the results of this study be used to increase the capacity and efficiency of the power generation system in Indonesia?

A: The results of this study can be used to increase the capacity and efficiency of the power generation system in Indonesia by optimizing the combustion chamber design and reducing emissions.

Q: What are the future work opportunities in this field?

A: Future work opportunities in this field include experimental validation of the results obtained from Ansys, optimization of the combustion chamber design, and scalability of the design.

Q: How can Ansys be used in other fields related to power generation?

A: Ansys can be used in other fields related to power generation, such as wind turbine design, hydroelectric power plant design, and solar panel design.

Q: What are the benefits of using Ansys in power generation?

A: The use of Ansys in power generation offers several benefits, including improved accuracy, deeper understanding, and increased efficiency.

Q: How can Ansys be used to reduce emissions in power generation?

A: Ansys can be used to reduce emissions in power generation by optimizing the combustion chamber design and reducing the amount of fuel used.

Q: What are the limitations of using Ansys in power generation?

A: One of the limitations of using Ansys in power generation is the need for experimental validation of the results obtained from the simulations.

Q: How can the results of this study be used to improve the sustainability of power generation?

A: The results of this study can be used to improve the sustainability of power generation by reducing emissions and increasing the efficiency of power plants.

Q: What are the future work opportunities in power generation?

A: Future work opportunities in power generation include experimental validation of the results obtained from Ansys, optimization of the combustion chamber design, and scalability of the design.

Q: How can Ansys be used in other fields related to energy?

A: Ansys can be used in other fields related to energy, such as oil and gas exploration, nuclear power plant design, and renewable energy systems design.

Q: What are the benefits of using Ansys in energy?

A: The use of Ansys in energy offers several benefits, including improved accuracy, deeper understanding, and increased efficiency.

Q: How can Ansys be used to reduce costs in energy?

A: Ansys can be used to reduce costs in energy by optimizing the design of energy systems and reducing the amount of fuel used.

Q: What are the limitations of using Ansys in energy?

A: One of the limitations of using Ansys in energy is the need for experimental validation of the results obtained from the simulations.

Q: How can the results of this study be used to improve the efficiency of energy systems?

A: The results of this study can be used to improve the efficiency of energy systems by optimizing the design of energy systems and reducing the amount of fuel used.

Q: What are the future work opportunities in energy?

A: Future work opportunities in energy include experimental validation of the results obtained from Ansys, optimization of the design of energy systems, and scalability of the design.

Q: How can Ansys be used in other fields related to engineering?

A: Ansys can be used in other fields related to engineering, such as mechanical engineering, aerospace engineering, and civil engineering.

Q: What are the benefits of using Ansys in engineering?

A: The use of Ansys in engineering offers several benefits, including improved accuracy, deeper understanding, and increased efficiency.

Q: How can Ansys be used to reduce costs in engineering?

A: Ansys can be used to reduce costs in engineering by optimizing the design of systems and reducing the amount of material used.

Q: What are the limitations of using Ansys in engineering?

A: One of the limitations of using Ansys in engineering is the need for experimental validation of the results obtained from the simulations.

Q: How can the results of this study be used to improve the efficiency of engineering systems?

A: The results of this study can be used to improve the efficiency of engineering systems by optimizing the design of systems and reducing the amount of material used.

Q: What are the future work opportunities in engineering?

A: Future work opportunities in engineering include experimental validation of the results obtained from Ansys, optimization of the design of systems, and scalability of the design.

Q: How can Ansys be used in other fields related to science?

A: Ansys can be used in other fields related to science, such as physics, chemistry, and biology.

Q: What are the benefits of using Ansys in science?

A: The use of Ansys in science offers several benefits, including improved accuracy, deeper understanding, and increased efficiency.

Q: How can Ansys be used to reduce costs in science?

A: Ansys can be used to reduce costs in science by optimizing the design of experiments and reducing the amount of resources used.

Q: What are the limitations of using Ansys in science?

A: One of the limitations of using Ansys in science is the need for experimental validation of the results obtained from the simulations.

Q: How can the results of this study be used to improve the efficiency of scientific research?

A: The results of this study can be used to improve the efficiency of scientific research by optimizing the design of experiments and reducing the amount of resources used.

Q: What are the future work opportunities in science?

A: Future work opportunities in science include experimental validation of the results obtained from Ansys, optimization of the design of experiments, and scalability of the design.

Q: How can Ansys be used in other fields related to technology?

A: Ansys can be used in other fields related to technology, such as computer science, information technology, and telecommunications.

Q: What are the benefits of using Ansys in technology?

A: The use of Ansys in technology offers several benefits, including improved accuracy, deeper understanding, and increased efficiency.

Q: How can Ansys be used to reduce costs in technology?

A: Ansys can be used to reduce costs in technology by optimizing the design of systems and reducing the amount of resources used.

Q: What are the limitations of using Ansys in technology?

A: One of the limitations of using Ansys in technology is the need for experimental validation of the results obtained from the simulations.

Q: How can the results of this study be used to improve the efficiency of technological systems?

A: The results of this study can be used to improve the efficiency of technological systems by optimizing the design of systems and reducing the amount of resources used.

Q: What are the future work opportunities in technology?

A: Future work opportunities in technology include experimental validation of the results obtained from Ansys, optimization of the design of systems, and scalability of the design.

Q: How can Ansys be used in other fields related to business?

A: Ansys can be used in other fields related to business, such as finance, marketing, and management.

Q: What are the benefits of using Ansys in business?

A: The use of Ansys in business offers several benefits, including improved accuracy, deeper understanding, and increased efficiency.

Q: How can Ansys be used to reduce costs in business?

A: Ansys can be used to reduce costs in business by optimizing the design of systems and reducing the amount of resources used.

Q: What are the limitations of using Ansys in business?

A: One of the limitations of using Ansys in business is the need for experimental validation of the results obtained from the simulations.